House Plan and Construction Cost Calculator
Enter your plot size in square yards, pick one of three house plans, approve it and see what it may cost to build in the USA. Free, instant and no sign-up.
Use this when: you own or plan to buy a plot and want a rough house layout and an early construction budget. Selling or building for others? Price the job with the Markup and Margin Calculator.
Pick a house plan
How the house plan and cost calculator works
Type the size of your plot in square yards. The calculator turns it into square feet (1 square yard is 9 square feet), works out a plot shape, leaves setbacks at the front, back and sides, and lays rooms out inside the space that is left. You get three different plans to compare. Pick one and approve it, and the cost estimate and the AutoCAD file appear.
How the cost is estimated
Building cost = built area × cost per square foot. The rate starts at $175 per square foot for standard finishes at the national average. It is then multiplied by the finish quality (standard 1.0, mid-range 1.35, premium 1.9) and by the region (lower-cost states 0.88, national average 1.0, higher-cost states 1.28). The garage is priced at 55% of the house rate.
Three allowances are then added to the building cost: 8% for site work and utilities, 4% for permits and design fees, and 8% for contingency. The likely range runs from 12% below to 18% above the estimate.
Example
A 200 square yard plot (1,800 sq ft) with a 2-floor, 3-bedroom house and a garage gives a built area of about 2,056 sq ft: about 1,813 sq ft of living space and a 243 sq ft garage. With mid-range finishes at the national average the rate is about $236 per square foot. Living space comes to about $428,000 and the garage to about $32,000. The allowances add about $92,000, so the total is about $552,000, with a likely range of $486,000 to $651,000.
Building cost per square foot used by the calculator
These are the rates before the 20% allowances for site work, fees and contingency.
| Finish quality | Lower-cost states | National average | Higher-cost states |
|---|---|---|---|
| Standard | $154 | $175 | $224 |
| Mid-range | $208 | $236 | $302 |
| Premium | $293 | $333 | $426 |
Cost per square foot to build a house in the USA
Building costs differ a lot from state to state. NAHB data cited by Opendoor puts the cheapest state, Mississippi, near $154 per square foot and the most expensive, Hawaii, near $230. Standard new construction is often quoted at about $150 to $250 per square foot, and custom homes cost 20 to 30 percent more than production-builder homes. Use these numbers as a starting point, then get quotes from builders near you.
Square yards to square feet
| Plot size | Square feet | Square meters |
|---|---|---|
| 100 sq yd | 900 sq ft | 84 m² |
| 150 sq yd | 1,350 sq ft | 125 m² |
| 200 sq yd | 1,800 sq ft | 167 m² |
| 300 sq yd | 2,700 sq ft | 251 m² |
| 500 sq yd | 4,500 sq ft | 418 m² |
What the plans show
- Room names and sizes in feet, doors, windows and the main entry
- Stairs and simple furniture symbols so you can judge the size of each room
- The plot, the street side and the front setback
- A "Tight" note when a room is under about 8.5 feet in its short direction, or a bath under 4.5 feet
Small plots cannot always fit a standard 10 by 17 foot garage and every bedroom. If you see tight rooms, try 2 floors, fewer bedrooms, no garage or a wider plot shape. These are concept layouts for early planning. A licensed architect or engineer must prepare the final drawings, and local codes, setbacks and structural needs differ.
Open the plan in AutoCAD
After you approve a design, press Download DXF file. In AutoCAD choose OPEN, pick the file and type ZOOM and then E to see the whole plan. Units are feet, and the layers use common names such as A-WALL-EXT, A-GLAZ and A-DOOR. Other CAD programs that read DXF files can open it too.
Not included in the estimate
- The land itself
- Furniture, appliances you plan to bring, and landscaping
- Rock, steep slopes, poor soil or long utility connections on your site
- Price changes between now and the day you build
Frequently asked questions
Is the result exact?
No. It is an early planning estimate. Real prices depend on your city, material prices, the builder, the season and the design you choose.
Why does the calculator ask for square yards?
Many plots are sold in square yards. The calculator turns your plot into square feet, because building costs in the USA are priced per square foot.
Does the estimate include the land?
No. Land, furniture, landscaping and unusual site problems such as rock, slopes or poor soil are not included.
Can I use it for a plot outside the USA?
The plan layout works for any plot, but the cost numbers are US averages. Outside the USA, use local prices for materials and labor.
How do I open the plan in AutoCAD?
Approve a design, press Download DXF file, then in AutoCAD choose OPEN, pick the file and type ZOOM and then E. The units are feet.
Is my data saved?
No. The numbers you type stay in your browser and are not sent to our servers.
Related calculators
- Concrete CalculatorCubic yards and bags for a slab
- Roofing CalculatorRoof area, squares and shingle bundles
- House Plans GalleryBrowse 8 floor plans with sizes and build costs
- Markup and Margin CalculatorFind the selling price, markup and margin from your cost
- Profit/Loss CalculatorFind your profit or loss amount and percentage
- Percentage CalculatorFind a percent of a number, add or subtract it
Browse all calculators or all guides.