Free Calculator USA

Home › Home and Building Calculators › Roofing Calculator

Roofing Calculator

Estimate the roof area, the number of roofing squares and the bundles of shingles for a simple gable or hip roof.

Use this when: you are getting roofing quotes or planning a re-roof and want a quick check on how much shingle material is needed. Planning a new build? See the House Plan and Construction Cost Calculator.

Quick answer: Roof area = (length + 2 × overhang) × (width + 2 × overhang) × pitch factor. One roofing square is 100 sq ft and takes 3 bundles. A 40 × 28 ft house with a 6/12 pitch and 1 ft overhang has about 1,409 sq ft of roof, 15.5 squares with waste, and needs 47 bundles.

Last updated: November 6, 2026. Free, runs in your browser, nothing is saved.

How this roofing calculator works

A sloped roof has more surface than the footprint of the house under it. The steeper the pitch, the bigger the difference. Enter the length and width of the house, the pitch of the roof (the rise per 12 inches of horizontal run, such as 6/12) and how far the roof overhangs. The calculator multiplies the footprint, including the overhang, by a pitch factor to get the real roof area. It then converts to roofing squares and bundles.

The formulas

Pitch factor = √(1 + (pitch ÷ 12)²). Roof area = (length + 2 × overhang) × (width + 2 × overhang) × pitch factor. One roofing square = 100 square feet. Asphalt shingles are usually sold at 3 bundles per square. Add 10 to 15 percent for waste, starters, ridge caps and cuts.

Example

A 40 ft by 28 ft house with a 1 foot overhang has a footprint of 42 × 30 = 1,260 square feet. A 6/12 pitch has a factor of 1.118, so the roof area is 1,409 square feet, or 14.09 squares. With 10% waste that is 15.50 squares, which is 47 bundles.

Pitch factors

Multiply the footprint by the factor for your pitch. The last column shows the roof area of a 1,000 square foot footprint.

PitchPitch factorRoof area for a 1,000 sq ft footprint
3/121.0311,031
4/121.0541,054
5/121.0831,083
6/121.1181,118
7/121.1581,158
8/121.2021,202
9/121.2501,250
10/121.3021,302
12/121.4141,414

What this covers and what it does not

The estimate works for simple gable and hip roofs. Dormers, valleys, chimneys, skylights and multiple roof levels change the real area, so a roofer should measure the actual roof. Underlayment, flashing, drip edge, vents and ridge caps are separate items.

Tips

Get at least two or three written quotes and compare them by the number of squares, the shingle type and what is included, such as tear-off and disposal. Roofing prices are often given per square, so this calculator makes it easy to check a quote.

Frequently asked questions

What is a roofing square?

A roofing square is 100 square feet of roof. Contractors price roofing per square.

How many bundles of shingles are in a square?

Most architectural and 3-tab asphalt shingles come 3 bundles to a square. Some premium shingles use 4, so check the package.

How do I find my roof pitch?

Place a level on the roof or rafter, measure 12 inches along it and measure the rise from that point up to the roof. A rise of 6 inches is a 6/12 pitch.

How much waste should I add?

About 10% for a simple roof and 15% or more for complex roofs with many valleys and hips.

Related calculators

Browse all calculators or all guides.